FRANÇAIS
FRANÇAIS

Vulcraft is your partner in the selection of Non-Composite Deck products. Vulcraft Non-Composite Floor Deck, also known as “form deck,” is perfect for areas that need an economical and efficient raised/elevated floor system. Unlike composite deck, which binds with deck to form one strong unit, non-composite deck instead acts as a form to hold the wet concrete until it is cured. Capable of supporting lighter floor loads in a residential building load to heavy floor loads in industrial settings, our non-composite floor deck adds value in multiple applications, and can be finished in ways that complement any design style.

Roof Deck
Steel roof designation graphic
 

Understanding Deck Designations

Whether it is a roof deck or a floor deck, the labeling of the deck is done in similar ways. Below is an example of what the parts of a designation mean.

Designations Vocabulary
  • C - Standard non-composite deck with nested sidelap

NON-COMPOSITE DECK PROFILES

0.6C NON-COMPOSITE DECK PROFILES

Our 0.6C Non-Composite Floor Deck is 9/16 inches in depth, and is perfect for spaces with lighter floor loads such as residential buildings. Supports are typically spaced closed together at 2’ to 4’ on center. This profile can also be used as non-structural paneling. Available in 30”, 35”, and 36” panels, this deck comes in a variety of finishes to suit any design need.

0.6C Non-Composite Profile Floor Deck illustration
0.6" C Non-Composite deck

For technical information, including loading capacity information, please refer to our Technical Information. While this information is for common situations, not every project is common. For answers to any questions, please reach out and TALK TO AN EXPERT.

0.6C Non-Composite Deck illustrations

UTILIZING OUR DESIGN TOOLS

Vulcraft’s Design Tools allow you, as the designer, to obtain custom design information for your project, look at scenarios, and allow you to find the highest value solutions for your client.

BARE DECK DIAPHRAGM

Formerly 2018 IBC Deck Diaphragm

Calculate the bare deck diaphragm shear and stiffness for your configuration based on AISI S310 and IAPMO reports.

BARE DECK UNIFORM LOAD

Formerly Steel Deck Uniform Load

Determine the uniform gravity loads for your bare deck configurations.

ADDITIONAL TOOLS

Information on wall anchorage design for steel deck, steel deck web crippling design, and other tools are available.

1.0C Non-Composite Deck illustrations

1.0C NON-COMPOSITE DECK PROFILES

1.0C Non-Composite Floor Deck measures 1 inch in depth, and comes in 30”, 32”, and 36” panels to fit spaces with lighter floor loads. Supports are typically spaced closed together at 2’ to 4’ on center. This profile can be used as non-structural paneling. This deck profile is available in multiple finishes for the perfect design touch to your project.

1.0C Non-Composite Profile Floor Deck illustration
1.0" C Non-Composite Deck

For technical information, including loading capacity information, please refer to our Technical Information. While this information is for common situations, not every project is common. For answers to any questions, please reach out and TALK TO AN EXPERT.

UTILIZING OUR DESIGN TOOLS

Vulcraft’s Design Tools allow you, as the designer, to obtain custom design information for your project, look at scenarios, and allow you to find the highest value solutions for your client.

BARE DECK DIAPHRAGM

Formerly 2018 IBC Deck Diaphragm

Calculate the bare deck diaphragm shear and stiffness for your configuration based on AISI S310 and IAPMO reports.

BARE DECK UNIFORM LOAD

Formerly Steel Deck Uniform Load

Determine the uniform gravity loads for your bare deck configurations.

ADDITIONAL TOOLS

Information on wall anchorage design for steel deck, steel deck web crippling design, and other tools are available.

1.5C NON-COMPOSITE DECK PROFILES

1.5C Non-Composite Deck measures 1.5 inches in depth, and comes in 36” panels. Used in areas with moderate floor loads, supports are typically spaced 4’ to 6’ on center. This deck profile is manufactured as Vulcraft 1.5B deck, but flipped upside down in the field, putting the larger rib on the bottom and allowing for concrete fill.

1.5C Non-Composite Profile Floor Deck illustration
1.5" C Non-Composite Deck

For technical information, including loading capacity information, please refer to our Technical Information. While this information is for common situations, not every project is common. For answers to any questions, please reach out and TALK TO AN EXPERT.

1.5C Non-Composite Deck illustration

UTILIZING OUR DESIGN TOOLS

Vulcraft’s Design Tools allow you, as the designer, to obtain custom design information for your project, look at scenarios, and allow you to find the highest value solutions for your client.

BARE DECK DIAPHRAGM

Formerly 2018 IBC Deck Diaphragm

Calculate the bare deck diaphragm shear and stiffness for your configuration based on AISI S310 and IAPMO reports.

BARE DECK UNIFORM LOAD

Formerly Steel Deck Uniform Load

Determine the uniform gravity loads for your bare deck configurations.

ADDITIONAL TOOLS

Information on wall anchorage design for steel deck, steel deck web crippling design, and other tools are available.

2C & 3C NON-COMPOSITE DECK PROFILES

2C & 3C Non-Composite Deck illustration

Used for heavier floor loads, our 2C Non-Composite Deck is 2 inches in depth, and 3C Non-Composite Deck is 3 inches in depth. A less commonly-used profile, it creates a more efficient option when used with composite (Vulcraft 2VLI & 3VLI). This product is the same as Vulcraft 2VLI and 3VLI, but is manufactured without the embossments. Panels for both profiles are 36”, and both profiles have multiple finishing options to get the perfect finished look for any project.

2C Non-Composite Profile Floor Deck illustration
2" C Non-Composite Deck
3C Non-Composite Profile Floor Deck illustration
3" C Non-Composite Deck

For technical information, including loading capacity information, please refer to our Technical Information. While this information is for common situations, not every project is common. For answers to any questions, please reach out and TALK TO AN EXPERT.

UTILIZING OUR DESIGN TOOLS

Vulcraft’s Design Tools allow you, as the designer, to obtain custom design information for your project, look at scenarios, and allow you to find the highest value solutions for your client.

BARE DECK DIAPHRAGM

Formerly 2018 IBC Deck Diaphragm

Calculate the bare deck diaphragm shear and stiffness for your configuration based on AISI S310 and IAPMO reports.

BARE DECK UNIFORM LOAD

Formerly Steel Deck Uniform Load

Determine the uniform gravity loads for your bare deck configurations.

ADDITIONAL TOOLS

Information on wall anchorage design for steel deck, steel deck web crippling design, and other tools are available.

LEARN MORE ABOUT OUR NON-COMPOSITE DECK

LEARN MORE ABOUT OUR NON-COMPOSITE DECK

CONTACT US

Vulcraft designs and manufactures steel deck to meet the requirements of the current edition of CAN/CSA S-136, the National Building Code of Canada (NBCC) as well as requirements of Canadian Sheet Steel Building Institute (CSSBI). Vulcraft also provides a full line of deck accessories, including end closures and pour stops.

NON-COMPOSITE DECK DATASHEETS

0.6C Non-Composite Load Tables
1.0C Non-Composite Load Tables
1.5C Non-Composite Load Tables
2C & 3C Non-Composite Load Tables
Additional Information


FLOOR DECK DESIGN TOOLS


TALK TO AN EXPERT



Copyright © VULCRAFT 2024. All rights reserved.